Foral® DX

Foral® DX rosin is a thermoplastic, acidic rosin produced by hydrogenating rosin to an exceptionally high degree. Similar to, but less refined than, Foral AX resin, it is likewise one of the palest, most highly stabilized rosins commercially available. Foral DX resin has very light initial color, and its strong resistance to oxidation results in excellent color retention in a wide range of applications. It is used as a tackifier and resin modifier in solvent adhesives and hot melt applied coatings and adhesives that must excel in these properties. Foral DX resin has a higher softening point and glass transition temperature than Foral AX, which passes the threshold to enable packaging as free-flowing pastilles in easily handled bags.

Product Code: 4268

Product Name

Foral® DX


  • Tackifier or modifier for adhesive systems, including:
    - Hot melt
    - Pressure sensitive
    - Solvent
    - Emulsion
    - Sealant compounds
  • Modifier in solvent-based or heat-sealable coatings
  • Component of thermoplastic compounds and hot melt depilatory waxes
  • Plasticizer/modifier of natural and synthetic rubber goods


  • Highest degree of hydrogenation available
  • Exceptional color
  • Excellent heat stability and color retention
  • Good acid functionality
  • Low odor
  • Widely compatible with polymers and solvents
  • Broad regulatory approval

General Sales Specifications

Softening Point, Ring & Ball, °C minimum 70
Color, USRG rosin scale, maximum XB
Acid Number, minimum 158
Abietic acid, UV, %, maximum 0.2
Refractive index at 100°C, maximum 1.4970


Package Form Net Weight
Bag, multi-wall, kraft Pastilles 50 lb, 22.68 kg
Keg, fiber Solid 50 lb, 22.68 kg
Drum, galvanized steel Solid 500 lb, 226.8 kg
Bulk, tank car or truck Molten Varies


CAS No. 65997-06-0 US DOT: Not regulated
International Nomenclature Cosmetic Ingredient (INCI): Hydrogenated Rosin
US FDA: 21 CFR 175.105
21 CFR 175.125
21 CFR 175.300
21 CFR 175.320
21 CFR 175.390
21 CFR 176.170
21 CFR 176.180
21 CFR 176.200   
21 CFR 176.210
21 CFR 177.1200
21 CFR 177.1210
21 CFR 177.2600
21 CFR 178.3120
21 CFR 178.3800
21 CFR 178.3850
21 CFR 178.3870

Other regulatory information available on request

Storage and Inventory Control

Pastillated or flaked resins may fuse, block, or lump during hot weather months, if stored near sources of heat, if double or triple stacked, or if stored for prolonged periods of time. These forms of resin are prone to gradual oxidation, some more so than others. This could result in darkening and/or could have an adverse effect on solubility in organic solvents. Care should be given to minimize opportunities for product oxidation throughout processing. Accordingly, it is strongly recommended that proper storage conditions and strict control of inventory be observed at all times, taking care that the oldest material is used first.

Product Safety

Read and understand the Safety Data Sheet before using this product.

Foral® is a registered trademark of Pinova, Inc.
© Pinova, Inc., 2010
Pinova® is a trademark of Pinova, Inc., Brunswick, Georgia, U.S.A.
The products and related information provided by Pinova are for manufacturing use only. Pinova makes no express, implied, or other representation, warranty, or guarantee concerning (i) the handling, use, or application of such products, whether alone, in combination with other products, or otherwise, (ii) the completeness, definitiveness, or adequacy, of such information for user’s or other purposes, (iii) the quality of such products, except that such products are of Pinova’s standard quality. Users are advised to make their own tests to determine the safety and suitability of each such product or product combination for their own purposes. Read and understand the Safety Data Sheet (SDS) before using this product.

Rev. 6 -1/18